Epson EasyMP Network Projection Operation Manual page 16

Connecting to a Projector on a Network and Projecting
Stops projection while connected to the projector. A black screen is
projected while stopped. Audio does not stop. To stop the audio, or to
display a User's Logo while projection is stopped, use the A/V Mute
function.
Show
Releases Stop or Pause.
Pause
Pauses projected images while connecting to the projector. The audio is
not paused.
Presentation Mode
Each time this is clicked, Presentation Mode switches between enabled/
disabled. s p.19
Projector control
While the projector is connected to the network, the projector's A/V
Mute, Switch PC source and Switch video source functions can be
controlled from both the Remote Control and the projector's Control
panel.
Click to display the following toolbar.
A/V Mute
The same function as the [A/V Mute] button on the
Remote Control.
User's Guide "Remote Control"
s
Switch PC source
The Source alternates between Computer1,
Computer2, USB Display, USB, and LAN each time
you click.
Switch video source
The Source alternates between S-Video and Video
each time you click. S-Video does not switch if the
cable is not connected.
Screen Preview
Displays the multi-screen preview screen.
Click to display a preview with the settings you have made. Click
each display to enlarge each Screen Preview to full-screen.
Set options
Transmission performance during the transfer of computer images can
be adjusted. s p.34
Movie Sending Mode
Not enabled on this projector. The message "The connected projectors
do not support Movie Sending." is displayed.
Disconnect
Disconnects the connection to the projector.
Signal intensity
This is displayed when the connection is made in Quick Connection
Mode. As the Signal intensity increases, so does the number of lit
indicators.
Switch toolbar display
16