Teac AG-H600NT Owner's Manual page 13

Adjusting bass, midrange, treble, and
balance of speakers
1 Select the item to adjust.
Each time you press the VOLUME/SET knob, the display changes
as follows:
VOLUME (volume)
BALANCE
DIMMER (see the previous page)
BASS
Adjusts the level of low frequency sound range. The level can
be adjusted from –12 to +12.
MID
Adjusts the level of middle frequency sound range. The level
can be adjusted from –12 to +12.
TREBLE
Adjusts the level of high frequency sound range. The level can
be adjusted from –12 to +12.
BALANCE
Adjusts the balance of the volume level between left and right
speakers.
2 Turn the VOLUME/SET knob to change the setting.
Leave the unit idle for 3 seconds to exit the setup mode.
3
BASS
MID
TREBLE
Tone Direct
Press the TONE DIRECT button to cancel the tone and balance
adjustments temporarily.
When this function gets active, the Tone Direct indicator lights up
temporarily.
FM
CH01
< To cancel the Tone Direct function, press the button again.
< When this function is active and no operation is done for about
5 seconds, the display is turned off regardless of the dimmer
setting.
Tone Direct indicator
98.1MHz
13