Table of Contents
Advertisement
REMOTE ACCESS
DVR GROUPS
Setting Up Groups
With the Smartbridge Software, you are able to set up multiple DVR's for remote viewing
called groups. This is beneficial if you have multiple locations requiring surveillance. To set
up a group, you need to have more than one Smartbridge DVR connected to a network.
Select the Advanced Tab
To add a group, Select settings
Default username is abc and default password is 123
To add a group, select the Video Source/group Tab
•
Select add group.
•
Type the name of the group in the current group box.
•
Select Modify to save the new group.
o Enter the username and password
o Enter an Alias name for the group.
o Enter the Device ID of your Smartbridge
DVR system for the group
o Select receive remote alarm signals if you want
to receive an alarm alert for your Smartbridge DVR
o Select Enable Pop Up to enable pop ups
•
Select add source to add a camera source
•
Select DEL Source to delete a camera source
•
Select Default to revert back to default settings
•
Select Apply to all to apply all settings to all
camera sources within the group
•
Select Save to save all settings.
Select the Local User Tab to add user rights/permissions to
the Smartbridge Software. You are able to add users to the
Smartbridge Remote viewer software. Administrator has full access
to the all features. General user has viewing capability only.
Page 48
Hide quick links:
Advertisement
Table of Contents
