Technical Specifications; Mb Diskette Drive - HP Proliant DL580 Quickspecs

QuickSpecs

Technical Specifications

System Unit Rack

1.44-MB Diskette Drive

DA-11372 World Wide — Version 25 — March 20, 2003
Chassis Footprint (HxWxD)
Weight
No hard drives installed,
one power supply
Input Requirements
Max BTU Rating
Power Supply Output Power
(per power supply)
Temperature Range
Relative Humidity
(non-condensing)
Maximum Wet Bulb
Temperature
Acoustic Noise
Diskette Size
LED Indicators (front panel)
Read/Write Capacity per
Diskette (high/low density)
Drive Supported
Drive Height
Drive Rotation
Transfer Rate (high/low)
Bytes/Sector
Sectors/Track (high/low)
Tracks/Side (high/low)
Access Times
Cylinders (high/low)
Read/Write Heads
hp ProLiant DL580 Generation 2 (G2)
6.94 x 19 x 26.5 in/17.6 x 48.3 x 67.3 cm
66 lb/29.9 kg
Rated Input Voltage
Rated Input Frequency
Input Power
Rated Input Current
4000 BTU
Rated Steady-State Power
Maximum Peak Power
Operating
Non-operating
Shipping
Operating
Non-operating
101.7°F/38.7°C
NOTE: Listed are the declared A-weighted sound power levels LWAd and the
declared average bystander position sound pressure levels LpAm when
operating in a 23° C ambient environment. Noise emissions were
measured in accordance with ECMA 74 and declared in accordance with
ECMA 109.
Idle
(Steady State)
L (BELS)
WAd
L (dBA)
pAm
NOTE: These values apply to 4U rack configuration. Configuration tested
included 2 processors, one 10, 000 rpm hard drive, 2 power supplies, 4
memory/IO fans and 3 CPU fans.
3.5 in
Green
1.44 MB/720 KB
One
One-third
300 rpm
500/250 Kb/s
512
18/9
80/80
Track-to-Track (high/low)
Average (high/low)
Settling Time
Latency Average
80/80
Two
100 to 120 VAC/200 to 240 VAC
50 to 60 Hz
1135W @ 110 VAC/1125W @ 220 VAC
12A (100 VAC), 9.8A (120 VAC), 4.9A (220
VAC)
800W/800W (lowline/highline)
800W/800W (lowline/highline)
50° to 95° F/10° to 35° C
-20° to 140° F/-29° to 60° C
-22° to 122° F/-30° to 50° C
10% to 70%
5% to 95%
7.0
54
3/6 ms
169/94 ms
15 ms
100 ms
37