Grandstream Networks HandyTone-488 User Manual page 31

HandyTone-488 User Manual
SIP Server
Outbound Proxy
SIP User ID
Authenticate ID
Authenticate
Password
Name
Use DNS SRV:
User ID is Phone
Number
SIP Registration
Unregister on
Reboot
Register Expiration This parameter allows the user to specify the time frequency (in minutes) the
Local SIP port
Local RTP port
All Rights Reserved Grandstream Networks, Inc. 2005
SIP Server's Domain name or IP address provided by VoIP service provider.
IP address or Domain name of Outbound Proxy, or Media Gateway, or Session
Border Controller. Used by ATA for firewall or NAT penetration in different
network environment. If symmetric NAT is detected, STUN will not work and
ONLY outbound proxy will provide solution for it. This information is
provided by VoIP service provider.
User account information, provided by VoIP service provider (ITSP), usually
has the form of digit similar to phone number or actually a phone number.
ID used for authentication, usually same as SIP user ID, but could be different
and decided by ITSP.
Account information, password for ATA to register to (SIP) servers of ITSP.
SIP service subscriber's name which will be used for Caller ID display
Default is No. If set to Yes the client will use DNS SRV to lookup for the SIP
server.
If "Yes" is set, a "user=phone" parameter will be attached to the "From"
header in SIP request
This parameter controls whether the HandyTone ATA needs to send
REGISTER messages to the proxy server. The default setting is "Yes".
Default is No. If set to yes, the device will first send registration request to
remove all previous bindings. Use only if proxy supports this remove bindings
request.
HandyTone ATA refreshes its registration with the specified registrar. The
default interval is 60 minutes (or 1 hour). The maximum interval is 65535
minutes (about 45 days).
This parameter defines the local SIP port the HandyTone ATA will listen and
transmit. The default value for FXS port is 5060.
This parameter defines the local RTP-RTCP port pair the HandyTone ATA will
listen and transmit. It is the base RTP port for channel 0. When configured,
channel 0 will use this port _value for RTP and the port_value+1 for its RTCP;
channel 1 will use port_value+2 for RTP and port_value+3 for its RTCP. The
default value for FXS port is 5004.
Update
31
Grandstream Networks, Inc.