Audio Control; Audio Control Menu - Kenwood DNX9280BT Instruction Manual

Audio Control

Audio Control Menu

Displays the Audio Control menu to set the sound
effect function of this unit.
1 Display the Source Control Screen
When a video screen is displayed, press the [SRC]
button.
2 Display the Audio Control menu
In this manual, the above selection is indicated as:
>
Touch [ ] [
3 Select the Audio Control item
Item
[Audio Control]
[Equalizer]
[EQ]
[Zone Control]
[Position]
[SRS WOW]
[Surround Control]
[Audio SETUP]
[Speaker Select]
[Car Type]
[Channel Level]
⁄
• [Audio SETUP] options can be locked. See
Memory> (page 74).
60
DNX9280BT
].
Page
60
61
61
62
62
63
64
65
66
67
<Setup
Audio Control
You can adjust the front/rear and right/left audio
balance.
1 Display the Audio Control screen
>
Touch [ ] [
60)
2 Set each item
1
1 Adjusts the front/back and left/right volume
around the touched area.
[2], [3] Adjusts the right and left volume
balance.
[5], [∞] Adjusts the front and rear volume
balance.
[Volume Offset] Finely adjust the volume of
the current source to minimize the difference in
volume between different sources.
⁄
• If you have increased the volume first, then reduced
the volume using the "Volume Offset", the sound
generated if you suddenly switch to another source
may be extremely loud.
[Subwoofer Level] Adjusts the subwoofer
volume.
The setting is available when subwoofer is set
to any item other than "None". See
Setup> (page 65).
[Supreme] Turns ON/OFF the Supreme function.
Technology to extrapolate and supplement with
proprietary algorithm, the high-frequency range
that is cut off when encoding.
This function works on DVD MEDIA, USB and
iPod sources.
>
] [Audio Control]. (page
<Speaker