Table of Contents
Advertisement
ADJUSTING TIP FEEL AND DOUBLE-CLICK
To adjust the tip sensitivity of your pen, select the P
Customizes the amount of pressure
needed to click, draw, or ink.
To create broad brush strokes or to click
with a light touch, use a S
For maximum control while drawing thin
lines, use a F
tip setting.
IRM
Click to
further customize
With your screen cursor positioned over a
blank area of the Pen tab, press down on
the screen with your pen tip. Use the
pressure bar to determine how hard you
must press on the pen to reach maximum
pressure.
Tips:
•
Use a soft T
F
IP
•
In some applications a soft pressure setting can make the pen overreact so that slight pressure on the pen
will be magnified on the screen. If you experience this, try a firmer T
•
To make double-clicking easier, expand the tap area that accepts a double-click (the double-click distance).
•
A large double-click distance may cause a delay at the beginning of brush strokes in some drawing
applications. This may also cause a delay at the beginning of a drag action or inking stroke. If you notice
such effects, try setting a smaller double-click distance and using the side switch to double-click. You can
also
set an ExpressKey to
Contents
tip setting.
OFT
the tip sensitivity.
for a wider range of pressure values in most pressure-sensitive applications.
EEL
double-click.
Contents
Index
tab.
EN
Adjusts the size of the double-click
area. Drag slider to O
want
Index
if you do not
FF
double-click
assist.
F
setting.
IP
EEL
28
28
Advertisement
Table of Contents
