Adjusting Items When Replacing Main Parts And Boards - Sony Cyber-Shot DSC-S600 Service Manual

1-1. Adjusting items when replacing main parts and boards

When replacing main parts and boards, adjust the items indicated by z in the following table.
Note 1: The automatic Adjustment Program does not support the "Initialization of data". Perform it manually.
Note 2: When replacing the SY-145 board, erase the data in internal memory of the board before replacement.
Note 3: When replacing the SY-145 board or the IC203 on the SY-145 board, execute formatting and initialize the internal memory
after replacement.
Note 4: When replacing the SY-145 board, perform "Initial Language Data Check" after replacement.
Adjusting item
CAMERA adjustment 1
CAMERA adjustment 2
CAMERA adjustment 3
CAMERA adjustment 4
CAMERA adjustment 5
LCD adjustment
(Note 1)
DSC-S600_ADJ
Adjustment
Flange back adj.
Flange back check
F No. compensation
Measure gain adj.
Mechanical shutter adj.
Light value adj.
AWB 3200K-5800K standard data input
AWB 3200K-5800K check
Color reproduction adj. & check
CCD linearity check
CCD white defect compensation check
CCD black defect compensation check
Strobe adj.
Auto focus illumination check
V-COM adj.
White Balance adj.
Initialization of data
Block
replacement
z
z
z
z z
z
z
Table 6-1-1
6-3
Replaced parts
Mounted parts Board
replacement replacement
z
z
z z
z z
z
z