Memory Installation - HP KAYAK XU800 Troubleshooting Manual

NOTE
Number of Sockets
Order of Installation
Unused Sockets
ECC Type
Memory type

Memory Installation

Use only the HP memory modules provided for your PC Workstation model. If you
want to find out about available accessories for your PC Workstation, refer to the HP
Accessories Web site at:
Memory Expansion Card With RIMM Sockets
Four sockets supporting ECC RDRAM modules
installed in pairs.
Fill the first two RIMM sockets A0 and B0.
Socket 0 is the one nearest to the processor(s).
Upgrades are installed in pairs using sockets A1 and
B1.
Unused A1 and B1 RIMM sockets must contain a
continuity module.
RDRAM ECC-type modules only used.
RDRAM modules must be installed in pairs and
contain the same HP part number.
Your PC Workstation Does Not Start Correctly
http://www.hp.com/go/pcaccessories.
Memory Expansion Card With DIMM Sockets
Four sockets supporting SDRAM 100 MHz ECC
modules installed in pairs.
Fill the first two DIMM sockets A0 and B0.
Socket 0 is the one nearest to the system board.
Upgrades are installed in pairs using sockets A1 and
B1.
Continuity module is not required for unused DIMM
sockets. Sockets A1 and B1 can be left empty.
SDRAM ECC-type modules supported only.
SDRAM modules must be installed in pairs and
contain the same HP part number.
Case 3 — Detected Hardware Error
15