HP Notebook Reference Manual page 94

Multimedia
Selecting Easy CD Creator Settings
To use DirectCD, Easy CD Creator, or CD Copier, the default
settings shown in the following table must be selected. These
settings are compatible; for example, the settings for DirectCD
do not conflict with the settings for CD Copier.
Application
DirectCD
Easy CD Creator
CD Copier
Auto Insert Notification settings are selected through the
operating system.
To select Disk-at-once settings:
1. Select Start > All Programs > Roxio Easy CD Creator 5
> Applications > CD Copier.
2. Select the Advanced tab.
3. Clear the Disk-at-Once check box.
4. Select the Set as Default button.
To select Track-at-once settings:
1. Select Start > All Programs > Roxio Easy CD Creator 5.
2. The fourth item on the status bar at the lower edge of the
6-12
CD Project window indicates whether Track-at-Once or
Disk-at-Once is selected.
If Track-at-Once is displayed on the status bar,
Track-at-Once is already enabled.
If Disk-at-Once is selected, double-click Disk-at-
Once to enable Track-at-Once.
Required Settings
Enable Auto Insert Notification
Disable Disk-at-Once
and
Enable Track-at-Once
Disable Disk-at-Once
Startup and Reference Guide––Part 2