Keypad Controls & Indicators - NAPCO GEM-K800 Operating Manual

Fire Alarm Light I will flash and the Keypad
sounder will beep when system is in a Fire Alarm
Condition (See Silencing a fire Alarm, Page 8)
H
Trouble Light will light and the Keypad
sounder will pulse to indicate that a system
trouble is present.
(See System troubles, Page 12)
Status Light will light when all zones are secure
and system is ready to be Armed.
Armed Light will light when system is Armed,
and will flash when system is in Alarm
Press followed by the corresponding
R
Function number to enable special functions and
options. (See Special Functions, Page 11)
To Bypass a zone, press
B
number to be bypassed, and then Arm system.
Press to reset Fire Zone, clear miss-
C
entered codes, reset Alarm Memory, etc.
4
KEYPAD CONTROLS AND INDICATORS
Zone Lights (1 through 8) will light to indicate
that the corresponding Zone is open, and will
flash to indicate a Zone in alarm.
and the zone
Numerical
Emergency Keys Press simultaneously
Keys 1-9, 0.
to signal an emergency condition.
Used to
Press
7
enter User
+
8 G
Codes, Zone
numbers, +
9 G
etc.
(Programmable)
AC Light will light to indicate
that AC Power is present.
+ for Fire Emergency,
G
for Auxiliary Emergency or
for Police Emergency.
Press
P
after a valid
User Code,
the system will
arm in STAY
Mode (With
interior Zones
bypassed).
U
causes the
entered code
or selected
function to be
executed.
Allows
Q
arming with
interior
protection on.