Control Panel; Control Settings - GE DSKS433E Owner's Manual And Installation Instructions

About the dryer control panel.
You can locate your model number on the label on the front of the dryer behind the door. Throughout this manual,
features and appearance may vary from your model.
Model DSKS433E
1
About the control settings.
IMPORTANT: Clean the lint filter each time you use the dryer.
Automatic cycles automatically determine fabric dryness. Select EXTRA DRY for heavier fabrics or to make regular
1
fabrics drier. Timed cycles run for a selected time.
Drying Cycles
AUTO REGULAR
PERM. PRESS & DELICATE For synthetic blends and delicates. For most loads select the Preferred Regular Setting marked
TIMED CYCLE Set the Cycle Selector at the desired drying time.
2
Temperature
REGULAR For regular to heavy cottons. Use with AUTO REGULAR or TIMED CYCLE .
(HIGH HEAT)
PERM. PRESS For synthetics, blends, delicates and items labeled permanent press.
(MED. HEAT) Use with PERM. PRESS & DELICATE or TIMED CYCLE .
DELICATES For delicates and special care fabrics. Use with PERM PRESS & DELICATE or TIMED CYCLE .
(LOW HEAT)
FLUFF For fluffing items without heat. Use the TIMED CYCLE .
(NO HEAT)
3
Start
— Close the dryer door. Push the START button to start the dryer. Opening the door during operation will stop
the dryer. To restart the dryer, close the door and select START to complete the cycle.
NOTE: Drying times will vary according to the type of heat used (Electric, Natural or LP gas), size of
load, types of fabrics, wetness of clothes and condition of exhaust ducts.
6
NOTE: Not all features are available on all dryer models.
∗
For cottons and most linens. For most loads select the Preferred Regular Setting marked
NORMAL DRY.
∗
NORMAL DRY.
2 3