Auto Drying; Washing Clothes Using The Cycle Selector - Samsung WD0704RE User Manual

Hide thumbs Also See for WD0704RE:
Table of Contents

Advertisement

Available languages

Available languages

Auto Drying

Samsung's brand-new technology, outstanding Auto Dry can apperceive the condition of your
drying clothes, and decide automatically when to stop, bringing convienence to your life.
Cup Board
automatically stop drying "Just in Time".
• Just in Time: At the very time when your clothes are dry, the machine apperceives it and
• For example, if the machine apperceives clothes are dry 50min after the 160min course

Washing clothes using the cycle selector

Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Control"
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1. Turn on your sink's water tap.
2. Press the Power button.
3. Open the door.
4. Load the articles one at a time loosely into the drum, without overfilling it.
5. Close the door.
6. Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
Pre-wash is only available when selecting the Cotton, Synthetics, Denim, Sports Wear, Daily
Wash cycles. It is only necessary if your clothing is heavily soiled.
7. Use the Cycle Selector to select the appropriate cycle according to the type of material:
Cotton, Synthetics, Denim, Sports Wear, Delicates, Wool, Hand Wash, Daily Wash, Quick
15', Spin, Rinse+Spin. The relevant indicators will illuminate on the control panel.
8. At this time, you can control the wash temperature, the amount of rinses, the spinning
speed, and the delay time by pressing the appropriate option button.
9. Press the Start/Pause button and the wash will begin. The process indicator will light up
and the remaining time for the cycle will appear in the display.
Pause Option
Within 5 minutes of starting a wash, it is possible to add/remove laundry items.
1. Press the Start/Pause button to unlock the door.
The door cannot be opened when the water is too HOT or the water level is too HIGH.
2. After closing the door, press the Start/Pause button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1. Open the door.
2. Remove laundry.
WD0704RE-02829C_EN.indd 27
, Low Temp.
stops drying, preventing damage to clothes caused by over-drying. The drying time will
be adjusted accordingly during the course.
of Cup Board starts, it will stop drying right away and start cooling course,with the
display showing 10min instead of 110min. After cooling, the display shows End and the
whole course ends.
and Iron
all use Auto Dry technology, and will
washing a load of laundry _27
2010-7-16 16:32:02

Advertisement

Table of Contents
loading

Table of Contents