System Map In Mstm - HP B6191-90015a User Manual

System Map in mstm

The following figure shows a system map in mstm:
Figure 4-2
File System Device
==== ====== ======
Path Product
=========== ========================= =========== ==================
8 Bus Adapter
8/0 Bus Adapter
8/0/0 NIO Terminal Multiplexor
8/4 Fast/Wide SCSI Interface
8/4.3.0 SCSI Disk
8/4.4.0 SCSI Disk
8/4.10.0 SCSI Disk
8/4.11.0 SCSI Disk
8/16 Core I/O Adapter
8/16/0 Centronics Interface
8/16/5 SCSI Interface
8/16/5.1.0 SCSI Tape
8/16/5.2.0 SCSI Disk
8/16/6 LAN Interface
8/16/7 Built-in Keyboard/Mouse
8/20 Core I/O Adapter
8/20/2 RS-232 Interface
8/20/5 EISA Adapter
10 Bus Adapter
32 CPU
34 CPU
49 MEMORY
Navigation of the system map is done by using the Up/Down/Left/Right arrow keys and the
Prev/Next or Page Up/Page Down keys.
To select a specific device for testing, place the cursor on the specific device and press
Return; all other devices are unselected. (To select a device and leave all other selected
devices in their current state, place the cursor on the specific device and press the space
bar.):
You can use the TAB key to activate a pull down menu which allows you to select the
specific tool that you want to run on the selected device(s). :
Chapter 4
/usr/sbin/stm/ui/bin/stm
hpdst199
Tools Options
===== =======
Last
Active Tool Status
Information Successful
Information Successful
Information Successful
Information Successful
Exercise
Verify
FW Update
FW Update
Information Successful
Information Successful
Information Successful
Verify
Information Successful
Exercise
Information Successful
Information Successful
Information Successful
Information Successful
Information Successful
Exercise
Exercise
Exercise
Support Tools Manager (STM)
System Map and Device Icons
Help
====
Last Op
Aborted
Successful
Successful
Successful
Query Pending
Abort Pending
Successful
Successful
Successful
37