Advertisement
6.
SIRIUS OPERAliON
Selecting SIRIUSSIRIUS SATELLITE RADIO modes
Press the [SAT] button or the [FNC] (FUNC) button to select the SIRIUS mode.
The SIRIUS indication lights up when SIRIUS mode is selected.
Notes:
• The [SAT] button selects the SIRIUS mode directly. Some head units do not have
a [SAT] button. If not, press the [FNC] (FUNC) button until SIRIUS is selected.
• The [FNC] (FUNC) button selects the external devices connected to the source
unit in order, for example: AM/FM mode
-+
DAB mode
-+
SIRIUS mode
-+
CD
mode
-+
CD
changer mode -+ etc.
Selecting a band
Press the [BND] button to select a band. Each press of the button changes the
display as shown below.
SR 1
-+
SR2
-+
SR3
-+
SR1 ...
*
The currently received band is displayed in the function mode indication.
*
Models without a function mode indication display the band name and channel
number in the display.
•
Information displayed during reception
The following information is displayed when SIRIUS Satellite Radio cannot be
received normally.
• UPDATING: when the receiver is turned on the first time or after a reset. Do not
turn power off during this time as the receiver is downloading the channel guide.
• ACQUIRING: when there has been a temporary loss of signal and the receiver is
attempting to reacquire a signal. ("LINKING" is shown on an 8-digit display)
• INVALID CH: a channel without a broadcast has been selected
("INVLD CH" is shown on an 8-digit display)
• NO SIGN-UP: a channel not available in your subscription
• ANTENNA: no antenna is connected or there is a problem with the antenna
SWitching the display
1.
Press the [DISP] (D) button to select the desired display.
The main display
or
the clock display appears each time you press the [DISP] (D)
button.
2. In the main display, press and hold the [DISP] (0) button for 1 second or longer
to cycle between the following display modes:
Channel name-+ song title
-+
artist name
-+
category name
-+
channel name
-+ ...
Notes:
• The display shows the abbreviated channel name for 2 seconds when a station is
selected before returning
to the chosen display mode.
• Scrolling starts when the channel name or other text has been displayed for 2
seconds. When scrolling finishes, the initial characters appear. To start scrolling
again, press the [ADJ] button.
11
Advertisement
