HP 512424-001 Maintenance And Service Manual page 101

Removal and replacement procedures
h. Keyboard (see
i. Switch cover(see
j. Speaker assembly (see
k. Display assembly (see
l. Top cover (see
m. System board (see
n. Fan/heat sink assembly (see
Remove the processor:
1. Use a flat-bladed screwdriver to turn the processor locking screw 1 one-half turn counterclockwise until you
hear a click.
2. Lift the processor 2 straight up and remove it.
✎
When you install the processor, the gold triangle 3 on the processor must be aligned with the triangle 4
embossed on the processor socket.
Reverse this procedure to install the processor.
4–56
"Keyboard" on page 21)
"Switch cover" on page
"Speaker assembly" on page
"Display assembly" on page
"Top cover" on page 37).
"System board" on page
"Fan/heat sink assembly" on page
25)
27)
28).
47).
50).
Maintenance and Service Guide