Clearing The Reset Reminders - Bryant T6-PRH Owner's Manual

ADVANCED PROGRAMMING OPTIONS

Clearing the reset reminders

The thermostat tells you when it's time to change the UV light in the evaporator coil
box connected to the furnace (if equipped), humidifier pad (if equipped), and
furnace filter. (See page 49 for more information.) When the reminder icons are
displayed on the screen, pressing and holding the done button for about three
seconds clears all reminders on the screen. This might not be the best option when
you have multiple reminders but have done only one of the tasks. This option lets
you reset the reminders individually.
1. Open the door.
2. Press and hold the buttons underneath the heat
and cool setpoints simultaneously (the two bottom
buttons on the right). The screen will display 01 and up
to three reset reminders, as enabled by your installer.
One of the reminders will flash; the display will show
the percentage of time used by that reminder item.
3. Repeatedly press the set button until the reminder you
want to clear flashes.
4. Press and hold the done button for about three seconds
to remove the reminder. The percentage associated with
it will go down to zero.
35