Leap Registration Utility - HP iPAQ hx4700 User Manual

4. Tap the Retrieve Certificate button to download the
certificate from the server. The status box at the bottom of
the screen will indicate whether the attempt to retrieve the
certificate was successful.
Note:
Microsoft Certificate Servers. Alternate Certificate Authority
servers will require a custom enrollment application which can
be developed using the Embedded Visual C 4.0 tool and the
Software Development Kit for Windows Mobile 2003-based
Pocket PCs.

LEAP Registration Utility

Cisco Lightweight Extensible Authentication Protocol (LEAP) is
an 802.1X authentication protocol that uses a username and
password pair to authenticate access by a wireless client to a
wireless router.
Use of the LEAP registration utility is required to log on to a
LEAP-authenticated network. Most of the other types of secure
networks are set up automatically by the HP iPAQ Wi-Fi
connection software. However, accessing a LEAP-authenticated
network requires initial registration using this utility. Once you
have authenticated and accessed this type of network, a
connection can take place automatically whenever you access the
LEAP-authenticated network.
To register the LEAP utility:
1. Tap Start > Settings > Connections tab > LEAP.
2. Tap New to create a LEAP profile. A LEAP profile must
contain the following information:
❏
❏
❏
❏
User's Guide
The enrollment tool is specifically designed to interact with
SSID
Username
Password
Domain
Using Wi-Fi
8–15