Deleting A Wireless Network; Monitoring Signal Strength And Status - HP iPAQ hx2000 User Manual

Deleting a Wireless Network

You can delete networks you manually entered. However, if a
network was automatically detected, you will not be able to delete
it.
To delete an existing or available wireless network:
1. Be sure Wi-Fi is powered on.
2. From the iPAQ Wireless screen, tap Settings > Wireless tab.
3. In the Wireless networks box, tap and hold the network you
want to delete.
4. Tap Remove Settings.

Monitoring Signal Strength and Status

To view the signal strength between your HP iPAQ and an access
point Wi-Fi connection:
1. Tap the Connections icon (
2. When the Connectivity box displays, you will be able to
view the type of network the HP iPAQ is connected to (for
example, Work or Internet) and an icon displaying the signal
strength.
Note:
connection is not present.
3. To make changes to the connection settings, tap Settings.
4. To exit the Connectivity box, tap the Hide button.
For more detailed information:
1. Tap Start > iPAQ Wireless.
2. Tap the Wi-Fi icon to turn Wi-Fi on.
3. Tap the Manager button.
User's Guide
The Signal Strength icon will not be displayed if a
Using Wi-Fi (not available on all models)
or ) in the Navigation bar.
8–6