GE 29869 User Manual page 5

NOTE: To exit review, press and release STOP
CncNcrNc
rHE SETTTNGS
Press and hold the SET button to enter the change
mode.The unit announces the current time and dav.To
change, press NEXT or PREVIOUS.To set and go on to
the next item, press SET
NOfi: To scroll from one setting to the next, press
and release SET. To exit the change list, press STOP.
SnrrrNc rHE TrME
For each message received, a time/day stamp is added
at the end of the message.
To Snr rHE HouR
1. Press and release NEXT or PREVIOUS until the unit
announces and displays the correct hour.
2. Once the hour is set, press SET to enter the minutes
m e n u .
To STT TTD MINUTES
1. Press and release NEXT or PREVIOUS until the unit
announces and displays the correct minutes.
2. Once the minutes are set, press SET to enter the day
m e n u .
To Snr rHE DAY
1. Press and release NEXT or PREVIOUS until the unit
announces and displays the correct day.
2. Once the day is set, press SEIThe unit announces the
time/day, then enters the rings to answer menu.
NOTE: The da;s of the week show in *re display as
numbers. For example,
"Sunday''
shows as 0.
SET
button
PREVIOUS
button
NE)(T
button
Time
H o u r
1 2 a . m . - l 1 p . m .
Minute
0 - 59
Duy
Sunday - Saturdal'
R i n g s 2 , 3 , 4 , 5 , 6 , 7 , 8 ,
to Answer toll saver
Message 1, 2, 3, 4 minutes
Length
S e c u r i t y 0 , 0 - 9 , 0 - 9 , 0 - 9
Code
SET
button
announces the rings to answer, then enters the
incoming message length menu.
Tou
Sevcn
The toll saver is the final setting in the Rings to Answer
menu.This feature allows you to know if you have new
messages when calling the machine from a remote
phone. lf you have new messages, the unit will ring
twice before answering. lf you don't, it will ring four
times.This allows you to hang up before the machine
PREITOUS
button
NEXT
button
als\ryels so that you don't have to pay toll charges.
NOTE: The message counter displavs 00 fbr
toll saver.