GE 29869 User Manual page 10

STOP button
3. Press and release the desired mailbox button.The
conversation starts recording after the tone.
. To stop two-way record, press and release STOp or
MEMO/TWOWAY,
The unit treats the 2-way recorded conversation as a
message, as the MESSAGES counter and mailbox
indicator show.
MEMO/TWOWAY
button
Rnuorn Accnss
You can access your answerer from any touch-tone phone
by entering your 4-digit security code (the default security
code is 0123).The remote functions do not work with rotarv
or push-button pulse-dialing phones.You can cut out the
wallet-size remote card near the back of the User's Guide
so you know the touch-tone commands when you're
picking up messages from another location.
To access your answerer:
1. Call your telephone number.
2. After you hear the beep that follows the greeting,
enter your 4-digit security code. To bypass the
greeting, you can enter your 4-digit security code at
any time while the greeting is playing.
3. The unit plays the remote menu after the correct
security code has been entered. Menu selections can
be made at any time while the menu is playing.
NOTE: The unit answers on the lOrh ring when it is
turned off or the memory is full. To ^...i
th.
answeret enter the 4digit securiry code after the
beep. If memory is full, play messages and erase
some of them to restore memory. If the answerer is
off, press 2 to turn it on.
NOTE: After the unit plays the remote menu, it will
wait several seconds for a command, then disconnect,
NOTE: The length of time for recording a
conversation depends on how many messages are
currently stored by the answerer.
ScnrnNruc Cens
(Auro DrscoNNncr FEATURE)
You can screen incoming calls by listening as the caller
leaves a message. lf you want to talk to that caller, pick
up any extension phone.
1 9