HP Jornada 430se User Manual page 32

26 Hewlett-Packard Jornada 430/430se Palm-size PC
You can switch to the Volume & Sounds control panel by
tapping the Speaker button.
You can switch to the Power control panel by tapping the
Battery button next to the battery status bar.
Using the Memory tab
To adjust how memory is allocated between
storage and programs
1. Open HP settings and tap the Memory tab.
2. Switch to the System control panel by tapping the
Windows button next to the memory status display,
and then tap the Memory tab.
3. Move the slider to the left or right.
4. Tap OK to save the changes and exit, or tap the Close
button (X in the upper right corner) to abandon the
changes.
Using the Drivers tab
To change the number of colors displayed
1. Open HP settings and tap the Drivers tab.
2. Select a display mode (8- or 16-bit) from the Mode
dropdown list.
3. To save the changes, tap OK. A dialog box asks you to
perform a soft reset. Tap OK and then perform the soft
reset (see the Soft reset section in chapter 11.)
To abandon the changes, tap the Close button (X in the
upper right corner).