Memory Of Alarm - First Alert FA148C User Manual

Disarming and Silencing Alarms

Memory of Alarm

If an alarm occurs, the keypad displays the zone number(s) that
caused the alarm and the type of alarm. These messages remain
displayed until cleared by a user.
To clear the display:
Note the zone number displayed and enter an OFF sequence.
(Security Code)
If the READY message will not display, go to the displayed zone and
correct the fault (close windows, etc.). If the fault cannot be corrected,
notify your alarm company.
* In cases of an alarm, trouble, or CHECK message, the 4-digit
security code and OFF key must be entered into the system two times
to clear the display.
- 22 -
Enter 4-digit security code, then
+ 1 *
press the OFF key.*
OFF
Example: Press 7 2 9 6 then
(cont'd)
1 *