First Alert FA110C User Manual page 20

DISARMING THE SYSTEM AND SILENCING ALARMS
Using the The OFF key is used to disarm the system and to silence alan and
HOFF
Key
trouble sounds.
U
IMPORTANT:
ff you return and the
main burglary sounder
is on:
DOf4OTENTERbkJt
CONTACTTHE POLICE
fromanearhysafelocatfon.
If you return after an
afarm has occurred and
the main sounder
has shut itself off:
the keypad will beep rapidly
won your en&rim. indicatim
-that -in alarm h&-ocamed-
during your absence
)he Memory of Alarm feature).
LENNEl~~EDl~~Dld
from a nearby safe location.
WHENSAFETODOSO,
reenter
andfollowtheprccedure
for
silencing
an alarm.
To Disarm the System
Enter your security code and press the OFF key. The "Ready" massage
will be displayed, and the keypad will emit a single tone to confirm that the
system is disarmed.
To Silence a Burglary Alarm
SEE IMPORTANT NOTE AT LEFT!
Enter your security code and press the OFF key to silence the alarm (or
warning tones of a Memory of Alarm). Note the zone in alarm on the
keypad display, and make that zone intact (close door, window, etc.). Now
enter the security code plus OFF sequence again to clear the keypad's
Memory of Alarm display. If the display will not clear and does not provide
a "Ready message, notify the alarm agency.
To Silence a Fire Alarm simply press the OFF key (the security code is
not needed to silence FIRE alarms). To then clear the keypad's Memory of
Alarm display, enter your security code and press the OFF key.
See page 28 for additional fire alarm information.
See the SUMMARY OF AUDIBLE/VISUAL NOTlFlCATiON section
for information which will help you to distinguish between FIRE
(I~l~ptedlPulsed) and BURGLARY (Continuous/Steady) alarm
.
-2o-