Table of Contents
Advertisement
DISPlay:MONitor:PORT? [MINimum | MAXimum | DEFault]
Parameters
Comments
DISPlay:MONitor:PORT:AUTO < state >
Parameters
Comments
Example
DISPlay:MONitor:PORT:AUTO?
Parameters
Comments
44 HP E1459A SCPI Command Reference
Returns the number of the current display Port as +0, +1, +2, or +3.
None
•
When sent with no parameter, this query returns a decimal number indicating
the Port being monitored. If AUTO was selected as the Port parameter in the
DISP:MON:PORT <port> command, the query returns the number of the most
recently-viewed Port. If either MINimum or DEFault was specified, this query
returns a +0. If MAXimum was specified, this query returns a +3.
Sets the automatic mode for the Display Monitor on or off. When AUTO mode is
ON, the port being monitored is automatically set to the last last port measured.
Parameter Name
Parameter Type
<state>
numeric or discrete
•
a 0 or OFF turns the display monitor automatic mode off; a 1 or ON turns the
display monitor automatic mode on.
•
*RST Condition: sets the automatic mode on.
DISP:MON:PORT:AUTO ON
Returns the state of the automatic display mode as either +0 or +1.
None.
•
A 0 indicates the automatic display mode is OFF; a 1 indicates the automatic
display mode is ON.
•
*RST Condition: sets the automatic mode on.
Range of Values
0, 1, OFF, ON
Turns automatic display mode on
Default
OFF
Advertisement
Table of Contents
