HP ProLiant DL320 Generation 5p Maintenance And Service Manual page 55

Close the processor retaining latch and the processor socket retaining bracket.
5.
Clean the old thermal grease from the heatsink and the top of the processor with the alcohol swab.
6.
Allow the alcohol to evaporate before continuing.
Apply all the grease to the top of the processor in one of the following patterns to ensure even
7.
distribution:
CAUTION: Heatsink retaining screws should be tightened or loosened in diagonally opposite
pairs (in an "X" pattern). Do not overtighten the screws as this can damage the board,
connectors, or screws. Use the wrench supplied with the system to reduce the possibility of
overtightening the screws.
Removal and replacement procedures 55