Advertisement
Chapter 5
Operating the Cisco ICS 7750
ICSConfig Tasks
78-14165-03
To enable ICS System Manager to properly function as a system management
tool, it is important that you use ICSConfig or ICS System Manager, as
appropriate, rather than the Cisco IOS CLI, when you enter key system
parameters.
Except for the procedures listed in
Cisco IOS CLI commands that are available for use in any Cisco IOS software
release that is intended for use on the Cisco ICS 7750.
You should always use ICSConfig for the following tasks:
Passwords
•
Changing the login password, which gives ICS System Manager
–
continued Telnet access to system cards
Changing the Windows 2000 administrator password, which grants those
–
with administrator privileges continued access to SPE310s
Changing the enable secret or enable password, which makes it possible
–
for administrators to enter certain Cisco IOS commands
Card configurations
•
Assigning or changing the IP addresses or subnet mask of system cards
–
When multiple VLANs are configured, the IP addresses and
Note
subnet masks of the FastEthernet subinterfaces need to be
configured via the CLI.
"ICSConfig
Tasks," you can enter all
Cisco ICS 7750 Installation and Configuration Guide
Accessing the System
5-17
Advertisement
