Installation and
Operation
This chapter shows how to install and operate the TLP VIM Video
Input Module.
Topics that are covered include:
Installation Overview
z
Mounting the TLP VIM
z
TLP VIM Front and Rear Panel Features
z
Operation
z
Installation Overview
To install and set up the TLP VIM, follow these steps:
1.
Turn all equipment off. Make sure the video sources (DSS,
cable boxes, PC, laptop, or other devices), the TLP VIM, and the
touchpanel are turned off and disconnected from power sources.
2.
Mount the TLP VIM, see
3.
Attach the cables, see
page
4.
Connect power cords and turn on the devices, see
page 6
Mounting the TLP VIM
The TLP VIM includes hook and loop fasteners so that it can be
securely mounted on or under a table or podium near to the
touchpanel.
Shut off all power to connected devices, then mount the TLP VIM as
required.
"Mounting the TLP
"TLP VIM Front and Rear Panel Features" on
4.
.
VIM", below.
TLP VIM • Installation and Operation
"Operation" on
3