Connection - Nokia 6620 User Manual

Settings
Call waiting (network service)
The network will notify you of a new incoming call while you have a call in progress.
Select Activate to request the network to activate call waiting, Cancel to request
the network to deactivate call waiting, or Check status to check if the function is
active or not.
Automatic redial
When this setting is activated, your phone will make a maximum of ten attempts
to connect the call after an unsuccessful call attempt. Press the End key to stop
automatic redialing.
Summary after call
Activate this setting if you want the phone to briefly display the duration of the
last call.
1-touch dialing
Select On, and the numbers assigned to the 1-touch dialing keys (2–9) can be dialed
by pressing and holding the key. See "Assign 1-touch dialing keys" on page 29.
Anykey answer
Select On, and you can answer an incoming call by briefly pressing any key, except
the Right selection key, the Power key, and the End key.
Line in use (network service)
This setting is shown only if the SIM card supports two subscriber numbers, that is,
two phone lines. Select which phone line (Line 1 or Line 2) you want to use for
making calls and sending short messages. Calls on both lines can be answered
regardless of the selected line.
You will not be able to make calls if you select Line 2 and have not subscribed to
this network service.
To prevent line selection, select Line change > Disable if supported by your SIM
card. To change this setting, you need the PIN2 code.

• CONNECTION

Select Menu > Settings > Connection > Access points, GPRS,
Data call, or Configurations.
63
Nokia 6620 User Guide Copyright © 2004 Nokia