Setting A Static Ip On Your Pc - Aztech WL556E User Manual

Setting a Static IP on your PC

The WL556E Wireless N Repeater will only give an IP address to your PC
upon initial installation. Once you have associated it with your Wireless
Router/AP, you will no longer have access to the device's web GUI. If you
wish to change any settings on the WL556E, you need to set a Static IP
address on your PC. Just remember to set it back to "Obtain and IP address
automatically" after you are done.
To set a static IP address on your PC using Windows XP:
1. Click Start > Control Panel
2. Click on Network and Internet Connections
User Manual
Page 25 of 34