Quick Guide For Menu Operation - Sansui HDLCD4060 Owner's Manual

CH /
Press and release CH
automatically stops at the next channel set into
memory.
For proper operation, before selecting channels, they
should be set into the memory. See "Channel setup"
on page 20.
DISPLAY
Press DISPLAY to display the current information on
the screen.
When the TV receives a digital signal, the digital
information will appear.
15-1
Service1
CC
SD 480i Audio 2/3
CH-1
2013/01/01 17:10 17:00-17:30
3_ARTE_Monosco_0820_0000_0030_Audio6_ABCDEFGHIJKLMNOPQ
RSTUVWXYZabcdefghijklmnopqrstuvwxyz_ABCDEFGHIJKLMNOPQR
STUVWXYZabcdefghijklmnopqrs
TUVWXYZabcdefghijklmnopqrs
• Channel number
• Channel label (if preset)
• V-Chip rating
• Program guide
• Resolution
Press DISPLAY again to clear the call display.
NOTE:
• After a few seconds, DISPLAY screen will return to
normal TV operation automatically.
SLEEP
To set the TV to turn off after a preset amount of time,
press SLEEP on the remote control. The clock will
change for each press of the SLEEP button (Off, 5
min, 10 min, ..., 240 min).To confirm the sleep timer
setting, press SLEEP and the remaining time will
be displayed for a few seconds. To cancel the sleep
timer, press SLEEP repeatedly until the display turns
to Off.
EN 16
/ . The channel
Monoscope_480i_1
Digital Air
TV-14-D
Good
tuvwxyz_ABCDEFGHIJKLMNOPQRS
• DTV Signal condition
• Broadcast program name
• Current date and time
• Audio language
• Closed Caption
Quick guide for menu
operation
Call menu and for example: Select Menu Language.
1
Press INPUT SELECT to select TV mode.
2
Press MENU. The TV menu screen will appear.
Picture Sound Time
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Color Temperature
Advanced Settings
3
Press ◀ or ▶ to select "Setup", then press ▼.
4
Press ▲ or ▼ to select "Menu Language", then
press ◀ or ▶ to select the desired language.
...on the following pages the menu can be called
in the same way as here.
5
Press MENU to return to the previous screen.
NOTE:
• If no buttons are pressed for more than about 30
(depending on your setting) seconds, the menu
screen will return to normal operation automatically.
Setup Lock Channel
Standard
50
50
50
50
50
Normal