Symptom
No GPS
symbols are
displayed
The vehicle
position is not
displayed
No voice
guidance
Buttons on the
remote control
do not beep
56
●GPS signals may not be received because of obstructions.
After moving the vehicle away from obstructions, the GPS
signals can be received.
●Check if the mode is set to the current position screen.
Press
POS
●Check if the volume control for the voice guidance has been
turned off.
●Check if the vehicle is off the route.
Repeat the route search while checking the route guide
screen.
●Check if you are driving the vehicle in the wrong direction on
the route.
Repeat the route search checking the direction of the
destination.
●Check if [Beep] is set to [Off] (
Check point
page 44).