Activation - Mazda Navigation system User Manual

Activation

Insert the map disc into the unit to start the Mobile Navigation System.
■
Map Disc
●
Cautions
Note
●The map disc cannot be inserted or ejected while the ignition switch is in the OFF position.
●Remember that the battery can run down if the ignition switch is kept in the ON or ACC
position for a long time while the engine not running.
1
Turn the ignition switch
to the ON position and
press
the display.
2
Insert the map disc
with the printed side
facing up.
12
Refer to "Handling and Care of Map Discs" to know how to handle a map
disc ( page 58).
OPEN to open
Note
●This display angle can be adjusted by pressing
●Press
to close the display.
OPEN
Note
●The main unit is located under the front passenger
seat.
●Condensation may form on the optical lens or the
map disc inside the unit when the temperature in
the vehicle increases in a short time such as when
heating the car on a cold day. This condensation
may cause malfunctions. If so, unload the map disc
and do not operate the unit for approximately 1
hour. Wipe the condensation off the map disc with a
soft cloth.
If the unit does not operate correctly after 1 hour,
consult an Authorized Mazda Dealer.
TILT
.
TILT
When the is
pressed, the display
angle changes in
stages.
(CAUTION) screen