HP 2240 Owner's Manual page 95

Hewlett-packard owner's guide
Hide thumbs Also See for 2240:
Table of Contents

Advertisement

5-2
This chapter contains information to help you determine what's
wrong with your system when you have problems. If you have a
problem that isn't listed in this chapter, or if your problem persists,
contact your designated service representative. When calling for ser-
vice, always have your system's model number and serial number
ready.
The instructions in this chapter assume you are using the HP-UX
version 10.20 or later operating system with the HP VUE version 3.0
graphical interface. If your system is configured with the HP CDE
graphical user interface, use command line options in a terminal win-
dow to perform tests.
NOTICE:
The J282/2240 power supply draws about 50
Watts in standby mode(system off) and will
turn on a fan when required to cool the supply.
NOTICE:
The J282/2240 fan failure circuitry requires that
the power cord must be disconnected for 30
seconds after any fan failure.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

J282Visualize j2240Hp 9000 j282Hp 9000 j2240

Table of Contents