Precor P80 Operating And Maintaining page 81

Assembling the AMT
To level the AMT:
1.
2. Reposition the adjustable feet as needed.
3. When you are finished positioning the adjustable feet,
4. To install the rear pedestal, align it over the rear
Gently rock the AMT while standing on one of its foot
plates and grabbing the opposite handlebar. First stand on
the left foot plate and grab the right handlebar to rock the
AMT, then repeat the step while standing on the right
foot plate and holding the left handlebar. If there is any
movement, ask your assistant to tip the unit on its side
while you locate the adjustable feet.
If you want to ...
Raise the front end of the AMT
Lower the front end of the AMT
Figure 7: Location of adjustable feet
place the unit on the floor. Try rocking it again, as
described in step 1, to verify that it is level.
crosspiece and press it gently into place.
Figure 8: Rear pedestal placement
Then turn the adjustable feet ...
Counterclockwise
Clockwise
23