V. Description - Pride Mobility Shuttle Owner's Manual

Do not expose the control console assembly to moisture. In the event that the console does become exposed
to moisture, do not attempt to operate your Shuttle until the control console assembly has thoroughly dried.
Key Switch
n Fully insert the key into the key switch to power up (turn on) your Shuttle.
n Pull the key out to power down (turn off) your Shuttle.
WARNING! If the key is removed from the key switch while your Shuttle is in motion, the
electronic brakes will engage and your Shuttle will come to an abrupt stop!
Speed Adjustment Dial
This dial allows you to preselect and limit your Shuttle’s top speed.
n The image of the tortoise represents the slowest speed setting.
n The image of the hare represents the fastest speed setting.
Horn Button
n The key must be fully inserted into the key switch for the horn to be operational.
n This button activates a warning horn.
n Do not hesitate to use the warning horn when you feel its use will prevent accident or injury.
Throttle Control Lever
This lever allows you to control the forward speed and the reverse speed of your Shuttle up to the maxi-
mum speed preset at the speed adjustment dial.
n Place your right hand on the right handgrip and your left hand on the left handgrip.
n Use your right thumb to push the right side of the lever to disengage your Shuttle’s brake and move
forward.
n Release the lever and allow your Shuttle to come to a complete stop before pushing the left side of the
lever to move in reverse.
n When the throttle is completely released, it will automatically return to the center “stop” position and
engage your Shuttle’s brake.
Battery Condition Meter
Whenever you have the key fully inserted, this meter will give an approximate reading of your Shuttle’s
battery voltage.
Light Switch (Optional)
This switch controls your Shuttle’s headlight system.
n Press this switch once to turn on the lights.
n Press it again to turn off the lights.
Power Seat Switch (Optional)
n With this switch set in the “drive” position, the throttle lever will perform as described earlier. With the
switch in the “seat” position, the throttle lever will raise or lower the optional power seat assembly.
14
V . D E S C R I P T I O N
Shuttle