Powering Up The Headset; Talk Time; Muting A Headset During A Call; Placing, Answering, Ending Calls With Desk Phone - Plantronics Savi W420 User Manual

5 Using Your Headset System

Powering Up the Headset

If the headset battery is charged and connected to the headset,
the headset is automatically on. The headset does not have an
on/off button.

Talk Time

With a single full charge, the Savi W410/W420 will provide up to
9 hours of talk time. Talk time will be reduced when operating in
wideband mode and/or if the headset is used consistently at a far
distance from the adapter.

Muting a Headset During A Call

Short press the dedicated mute button to toggle mute on/off. The
USB adaptor light will flash red when the headset is muted.
When mute is activated, you will hear three high tones. When
unmuted, you will hear three low tones.
After the Plantronics software is loaded, the mute tones can be
turned off by going to Start > Programs > Plantronics Control
Panel > Devices > Device Settings > Headset – Mute Tone.
Placing, Answering, and Ending Calls with
Desk Phone
Phones with Handset Lifter or Electronic
Hookswitch
To place a call 1. Short press call control button on headset*
or short press base desk phone talk button
2. Dial number
To answer a call 1. Short press call control button on headset
or short press base desk phone talk button
To end a call 1. Short press call control button on headset
or short press base desk phone talk button
*Assumes use of supported softphone
**Assumes your default line is set to PC
Plantronics Savi User Guide
Indicator Light
Call Control Button
For your safety, do not use headset at high volumes for
extended periods of time. Doing so can cause hearing
loss. Always listen at moderate levels. For more information
on headsets and hearing visit:
plantronics.com/healthandsafety.
Phones without Handset Lifter or Electronic
Hookswitch
1. Short press call control button on headset*
or short press base desk phone talk button
2. Remove handset from cradle**
3. Dial number
1. Short press call control button on headset or
short press base desk phone talk button
2. Remove handset from cradle**
1. Short press call control button on headset or
short press base desk phone talk button
2. Return handset to cradle**
9