Casio 2618 User Manual

MO0212-A
About This Manual
(Light)
General Guide
Icons
Seconds
Hour : Minutes
Hold
downA .
Day of week Month – Day
2. While an icon is flashing on the Mode Menu screen, use B and D to move it to
the icon whose mode you want to access.
• The following shows the name of the mode that corresponds to each icon.
Press D.
Icon
Mode
Icon
Mode
Icon
Mode
Timekeeping Mode
Hour :
Minutes
Day of week
Seconds
Year Month – Day
Timekeeping
Hour : Minutes
Day of week
PM
Seconds
indicator
Year Month – Day
To set the current time and date
USER'S GUIDE 2618
• The display of this watch uses two LCD panels that
make it possible to display icons, numbers formed with
segments, dot matrix characters, etc.
• Button operations are indicated using the letters shown
in the illustration.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the "Reference" section.
No matter what type of operation you want to perform with
this watch, the first step is always to select the proper
mode. Use the Mode Menu screen to select a mode.
• The Mode Menu screen shows icons for each of the
modes.
• Holding down A while the Mode Menu screen is on the
display replaces the current time with the current date.
To change modes
1. While the Mode Menu screen is on the display, press
B or D.
• This causes one of the icons on the screen to flash.
• If another screen is on the display, press C to display
the Mode Menu screen before performing the above
step.
• The flashing stops if you do not perform any operation
for about 10 seconds after performing the above step.
Press B.
Timekeeping World Time
Alarm Snooze Alarm
*
Remaining Memory Time Memo
* The (REMAIN) icon simply shows remaining time
memo memory, without changing to another mode.
Because of this, the icon does not flash. For
details about the icon, see "To recall time memos".
3. Press C to enter the mode whose icon is flashing.
• Simply pressing C while the
(MEMO: Time Memo
Mode) icon is flashing does not enter the Time Memo
Mode. See "Time Memo" for more information.
• After entering any mode, you can return to the Mode
Menu screen by pressing C again.
• In any mode and while the Mode Menu screen is on the
display, press L to illuminate the display.
Use the Timekeeping Mode to set and view the current
time and date.
• All of the operations in this section are performed in the
Timekeeping Mode, which you can enter from the Mode
Menu screen.
Setting the Time and Date
Note that all of the World Time Mode times are displayed
in accordance with the Home City code (the code for the
city where you normally use the watch) that you select in
the Timekeeping Mode.
• Once you correctly set your Home City time and date,
you can set the watch up for timekeeping in another time
zone by simply changing the Timekeeping Mode Home
City code.
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C twice to move the flashing to the Home City
code setting (see the illustration below), and then use
B and D to select the code you want.
• Make sure you select your Home City code before
changing any other setting.
• For full information on city codes, see the "City Code
Table".
3. Press C to move the flashing in the sequence shown below to select the other
settings.
4. When the setting you want to change is flashing, use B and D to change it as
described below.
Screen
50
OFF
TYO
12H
P 10:58
03 6-30
5. Press A to exit the setting screen.
• See "Daylight Saving Time (DST)" below for details about DST setting.
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
Time Memo
e-DATA MEMORY
The Time Memo feature of your watch lets you create up to 100 time memos, each of
which includes fields for time, date, data tag, and text. Time memos come in handy
when you need to keep track of your activities. Time memos are automatically sorted
Stopwatch chronologically on their date and time fields. You can recall records by scrolling
through them on the display.
• You can create a time memo starting from the Mode Menu screen or from the
Timekeeping Mode.
• Use the Recall Mode to recall time memos and to input time memo text.
Recall
• You can assign any one of the following nine data tags to a time memo.
,
,
To create a time memo starting from the Mode Menu screen
5. After selecting a data tag or the
Menu screen.
• The watch automatically returns to the Mode Menu screen if you do not perform any
button operation for a few minutes after the
To create a time memo from the Timekeeping Mode
1. Enter the Timekeeping Mode.
2. Hold down D until the word
memo appear on the display.
• Wait anywhere from one to ten seconds after
to start flashing on the display.
3. For the remainder of this procedure, perform the steps starting from step 3 under
"To create a time memo starting from the Mode Menu screen", above.
• Holding down D while
stores another time memo. In this case, however, the previous time memo is saved
without a data tag.
• After selecting a data tag or the
Timekeeping Mode screen.
• The watch automatically returns to the Timekeeping Mode screen if you do not
perform any button operation for a few minutes after the
flashing.
Home City
Seconds DST
Code
Day Month Year
To do this:
Reset the seconds to 00
Toggle between Daylight Saving Time ( ON
and Standard Time ( OFF )
Change the Home City code
Toggle between 12-hour ( 12H ) and 24-hour
( 24H ) timekeeping
Change the hour or minutes
Change the year, month, or day
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to display the DST setting screen.
3. Press D to toggle between Daylight Saving Time (
displayed) and Standard Time (
4. Press A to exit the setting screen.
• The DST indicator appears on the display to indicate
that Daylight Saving Time is turned on.
(Precaution), , (Medicine),
1. On the Mode Menu screen, use B and D to move the
flashing to (MEMO: Time Memo Mode icon).
Time
2. Hold down C until the word
and date recorded for the time memo appear on the
display.
• Wait anywhere from one to ten seconds (depending
on remaining memory capacity and other memory
conditions) after SAVE
to start flashing on the display.
is flashing on the display, press B to display
3. While
Date
the data tag panel, with the
• The word
MEMO is at the top of the display screen
while the data tag panel is on the display.
4. Press B to move the flashing to the right, and move it
to the data tag you want to select.
• Pressing B while the
the word at the top of the display screen to change to
FREE . None of the data tags are flashing at this
time, so you can use this screen to input a time memo
without a data tag. Pressing B again causes the
tag to flash again.
screen, press C to return to the Mode
FREE
or a data tag starts flashing.
SAVE , along the time and date recorded for the time
SAVE
is flashing on the display in step 2 of the above procedure
screen, press C to return to the
FREE
12/24-Hour
Format
Hour
Minutes
Do this:
Press D.
)
Press D.
Use D (east) and B(west).
Press D.
Press D (to increase).
Press D (to increase).
ON
OFF displayed).
, , ,
SAVE , along the time
appears for the indicator
tag flashing.
tag is flashing causes
appears for the indicator
or a data tag starts
1