Getting Started
Using IVR on IP Phones Without Screens
Using IVR on IP Phones Without Screens
Cisco Small Business SPA300 Series, SPA500 Series, and WIP310 IP Phone Administration Guide
<Reboot_History/>
The Cisco SPA301 and Cisco SPA501G provides an IVR menu to perform
configuration tasks and obtain information about the phone.
To access the IVR menu:
•
Cisco SPA301: Press the asterisk (*) four times. Enter the number of the
option and press #.
•
Cisco SPA501G: Press Settings. Enter the number of the option and press
#.
Some menus require entering of more information or numbers.
Press 9 on the IVR menu to be guided through a list of commonly used tasks or
enter the number of the desired menu to go directly to that feature.
Enter the number of the settings you want to change:
•
1—Network
-
1—Connection Type—Recites the connection type.
Press 1 to change the connection type, then press 0 for DHCP or press1
for static IP.
To save, press1.
To review, press 2.
To reenter, press 3.
To exit, press *.
-
2—IP Address—Recites the IP address
-
3—Netmask—Recites the network mask.
-
4—Gateway Address—Recites the gateway IP address.
-
5—MAC Address—Recites the MAC (hardware) address.
-
6—DNS—Recites the primary DNS server address.
•
2—Protocol
-
1—Call Control Protocol—Recites the current call control protocol.
Press 1 to change, or * to go back.
1
30