Belts and Pulleys
Belt
Blade Shaft Drive Belt
Jackshaft Belt
Transaxle Drive Belt
Water Pump Option Belts
Blade Shaft
Belt
V-Belt Tension
Ideal V-Belt tension is the lowest tension at which the belt will not slip under
peak load conditions. Check V-Belt tension frequently during the first 24-48
hours of run-in operation.
§ Over-tensioning shortens belt and bearing life.
§ Keep belts clean of foreign material that may cause slippage.
§ Make V-Belt inspection a periodic procedure.
§ Never dress belts, as this can cause premature failure.
CAUTION
42
Qty
Part Number
2
Part # 520009
1
Part # 521012
1
Part# 521004
Part# 521006
1
Part# 521008
Fig. 24 — Belt Locations
Jackshaft
Transaxle
Drive Belt
Jackshaft Belt
Belt Tensioner Pulley