Discrimination; Pinpoint - Bounty Hunter Titanium Camo Owner's Manual

OPERATION and CONTROLS
POWERING UP
Press
• The detector always starts in the DISCRIMINATION Mode.
Motion is required.
• Default sensitivity is at about 70% of maximum, (08).
• All target categories except iron are illuminated, meaning that all metal
objects will be detected except iron.
HOW TO WORK THE CONTROLS
POWER
ON/OFF
Press MODE button
to TOGGLE between
the Discrimination
and All Metal
Modes.
Press MENU button
to select the
menu item you
want to adjust.
10
Press or
to CHANGE THE SETTING
of the active menu item.
Press and hold
The active menu item is
the Pinpoint
the Highlighted line
button to
on the left side of
actuate PINPOINT
the display.
at any time.
OPERATION and CONTROLS (
MENU SELECTIONS
1. SENSITIVITY
Use and
line is highlighted.
Maximum sensitivity setting is 12.
Minimum sensitivity setting is 4.
If the detector beeps erratically or beeps when there are no metal objects
being detected, reduce the sensitivity.
The searchcoil produces a magnetic field and then detects changes in that
magnetic field caused by the presence of metal objects. This magnetic field
that the detector creates is also susceptible to the electromagnetic energy
produced by other electronic devices. Power lines, microwave ovens, lighting
fixtures, TVs, computers, motors, etc.... all produce EMI which can interfere
with the detector and cause it to beep when no metal is present, and
sometimes to beep erratically.
HOW DEEP WILL IT GO?
The Titanium Camo Metal Detector will detect a coin-sized object, like a
quarter, to a distance of about 11" from the searchcoil at maximum sensitivity.
Large metal objects can be detected to a depth of several feet. Detectability
is directly related to the size of the metal object -- the larger the object, the
deeper it can be detected.
Accuracy of Target Identification is also related to distance from the coil.
Beyond a distance of 8", the accuracy of Target Identification begins to
diminish.
Discrimination and All Metal Modes have independent sensitivity settings.
First highlight the mode, then adjust the sensitivity level for that mode.
Buttons
cont.)
to increase or decrease sensitivity while the SENSITIVITY
11