Dodge Challenger 2010 Owner's Manual page 34

Hide thumbs Also See for Challenger 2010:
Table of Contents

Advertisement

32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
6. The vehicle speed is 0 mph (0 km/h)
Automatic Unlock Doors on Exit Programming
The Automatic Unlock Doors On Exit feature can be
enabled or disabled. Refer to "Electronic Vehicle Infor-
mation Center (EVIC)/Personal Settings (Customer-
Programmable Features)" in "Understanding Your In-
strument Panel" for further information.
• When not using the EVIC, perform the following
steps:
1. Enter the vehicle and close all doors.
2. Place the Key Fob in the ignition switch.
3. Within 15 seconds, cycle the ignition switch between
OFF and ON/RUN and then back to OFF four times
ending up in the LOCK position. However, do not start
the engine.
4. Within 30 seconds, press the power door UNLOCK
switch to unlock the doors.
5. A single chime will indicate the completion of the
programming.
NOTE: If you do not hear the chime, it means that the
system did not enter the programming mode and you
will need to repeat the procedure.
6. Repeat these steps if you want to return this feature to
its previous setting.
NOTE: Use the Automatic Unlock Doors On Exit feature
in accordance with local laws.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Challenger srt 20102010 challenger srt

Table of Contents