Sunbeam HC4900 Instruction Booklet page 10

Using your Cordless Hair Cutting Set
continued
Using your Hair Cutter
• the first time you use your Hair Cutter, cut a small section
of hair to familiarize yourself with the cutting length of each
comb attachment.
• Ensure that the Hair Cutter is clean and that there is no hair
in the blades.
• place the person whose hair is about to be cut so that the
top of their head is at eye level.
• the hair should be clean and dry or damp. Comb hair free of
tangles.
• If the hair is longer than 10cm, it might be easier to cut the
hair to a manageable length using the barbers comb and
scissors provided before using the cutter.
• Start at the back of the neck with the blades pointing
upwards and gently guide the cutter up through the hair
towards the top of the head.
• do not force the cutter through the hair quickly as this may
pull the hair and cause discomfort.
• repeat on the sides of the head.
• to cut hair on the top of the head, start at the front and
gently guide the cutter through the hair to the back of the
head.
10