Page 1
Cordless Ceramic Hair Cutting Set Instruction Booklet HC4900 Please read these instructions carefully Please read these instructions carefully and retain for future reference. and retain for future reference.
Contents Sunbeam’s Safety Precautions Features of your Cordless Hair Cutting Set 6 Using your Cordless Hair Cutting Set Help Line Care and Cleaning Battery Disposal Important instructions – retain for future use.
If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood.
Page 4
Sunbeam’s Safety Precautions Sunbeam are very safety conscious when designing and manufacturing consumer products, but it is essential that the product user also exercise care when using an electrical appliance. Listed below are precautions which are essential for the safe use of an electrical appliance: •...
Page 5
Sunbeam Customer Service Line. • for additional protection, Sunbeam recommend the use of a residual current device (rCd) with a tripping current not exceeding 30ma in the electrical circuit supplying power to your appliances.
Features of your Cordless Hair Cutting Set Ceramic Cutter Set Thin-out function On/off switch Charge indicator lamp Charging base with accessories holder...
Using your Cordless Hair Cutting Set the cordless ceramic hair cutting set can be operated as a cordless or mains-powered appliance • the appliance must be fully charged before using for the first time. • to reach the optimum recharge capacity, the batteries should be charged for 12 hours.
Using your Cordless Hair Cutting Set continued Choosing the cutting length Choose one of the two cutting length attachments • When using the shorter attachment you can set the cutting lengths to the following length settings: 4, 8, 12, 16 or 20mm.
Page 10
Using your Cordless Hair Cutting Set continued Using your Hair Cutter • the first time you use your Hair Cutter, cut a small section of hair to familiarize yourself with the cutting length of each comb attachment. • Ensure that the Hair Cutter is clean and that there is no hair in the blades.
Page 11
Using your Cordless Hair Cutting Set continued • Shake the cutter regularly over a waste container during use to remove clippings. If a lot of hair accumulates during cutting, switch off, remove the comb and brush hair from the blades with the cleaning brush provided. •...
Page 12
Using your Cordless Hair Cutting Set continued Trimming beards and moustaches • Select the appropriate cutting length. • Start below the chin and gently guide the cutter upward and towards your ear. • using the comb and scissors provided, comb the moustache downward and trim carefully along the lip line.
Care and Cleaning Cleaning the Hair Cutter Blades Switch off the appliance and pull out the mains plug from the mains outlet. remove the cutting length comb from the appliance. Ensure the thin out function switch is set to "o". press the cutter set with your thumb pushing the cutter set away from the appliance until it clicks out from the holder.
Heading Help Line If you have any additional questions about using the Cordless Hair Cutting Set, please call the Sunbeam help line in australia on 1300 881 861. In new Zealand, please call 0800 786 232. Battery Disposal at the end of the products life, the Hair Cutting Set must returned to a Sunbeam Service Centre for correct disposal of the nimh rechargeable battery.
Sunbeam service centre. 1300 881 861 in australia, for a complete list of Sunbeam’s or 0800 786 232 in new Zealand. authorised service centres visit or call: your Sunbeam 2 year replacement...