Axis 540plus User Manual page 45

AXIS 540+ / AXIS 560 User's Manual
9. You will find the print server in the next window with the printer attached
on the connected port. Depending on the transport protocol you used when
you start the installation, the print server should appear as following:
• TCP/IP Network protocol:
IP Address and Port, e.g: 192.168.70.243 and LPT1
Only the ports with a connected printer show up in this window. If
the printer is not in the displayed print list, click Manually specify
the print server and do the following: Enter the print server's IP
address in the IP Address field and choose a port in the Print server
port field:
e.g., 192.168.70.243 and LPT1
The available ports are:
Ports available
AXIS 540+
AXIS 560
Parallel port 1 Parallel port 2
LPT1 —
LPT1 LPT2
Adding Printers in NetWare
Serial port
—
COM1
45