Table of Contents
Advertisement
Maintenance
MD-MT285E
! Cleaning
When the unit becomes dirty
Clean it with a soft cloth. When the unit is excessively
dirty, use a soft cloth dampened in water (external sur-
faces only).
Clean the plugs and the connecting
sockets.
If the plugs or sockets are dirty, noise
may be heard. Cleaning will prevent
noise.
Caution:
" Do not use chemicals for cleaning (petrol, paint thin-
ner, etc.). It may damage the cabinet finish.
" Do not apply oil to the inside of the unit. It may cause
malfunctions.
Note:
When the battery cover comes
off, attach the cover back as
shown below.
48
MD-MT285E TINSE0539AWZZ
Specifications
As a part of our policy of continuous improvement,
SHARP reserves the right to make design and specifica-
tion changes for product improvement without prior no-
tice. The performance specification figures indicated are
nominal values of production units. There may be some
deviations from these values in individual units.
! Portable MiniDisc recorder: MD-MT285E
Power source:
Power consumption: 7 W (AC adaptor)
Output power:
Dimensions:
1
Weight:
Input socket:
Output socket:
2
Type:
Signal readout:
DC 5 V:
AC adaptor (AC 230
V, 50/60 Hz)
DC 1.5 V: Commercially availa-
ble, "AA" size (LR6),
alkaline battery x 1
DC 4.5 V: Optional car adaptor,
AD-CA20X (for cars
with a 12-24 V DC
negative earth elec-
trical system)
RMS: 20 mW (10 mW + 10 mW)
(0.2 % T.H.D.)
Width: 83 mm (3-9/32")
Height: 28 mm (1-1/8")
Depth: 77 mm (3-1/32")
110 g (0.24 lbs.) without battery
Line/optical digital
Earphones (impedance: 32
ohms)/remote control
Portable MiniDisc recorder
Non-contact, 3-beam semicon-
ductor laser pickup
03/7/15
MD_MT285E_6.fm
Advertisement
Table of Contents
