Recd (Real-Ear To Coupler Difference); Section Overview; Recd Facts - audioscan RM500SL User Manual

Real-ear hearing aid analyzer
Hide thumbs Also See for RM500SL:
Table of Contents

Advertisement

15 RECD (real-ear to coupler difference)

15.1 Section overview

The RECD measurement procedure may be accessed by selecting RECD from the
REM tests list or from the Audiometry poster within Speechmap. An optional
RECD transducer is required for RECD measurements.
This section covers the following
topics:

15.2: RECD facts

15.3: RECD coupler response
15.4: RECD real-ear response
15.5: RECD results
FastFacts 15.1: RECD (real-ear to coupler difference)
15.2 RECD facts
Individual RECD values are derived by comparing the real-ear SPL for a given test
signal to the 2cc coupler SPL for the same test signal. These RECD values are
used to: (1) convert HL threshold and UCL obtained using insert phones to SPL
values, (2) simulate real-ear measurements from 2cc coupler measures (S-REM);
and (3) derive 2cc coupler targets from real-ear aided targets.
If you use insert ear phones
should
measure RECD
If you use headphones or sound field
verification,
RECD is not applied in any way
If you use 2cc coupler targets, you should use measured or age-related RECD.
Insert phone audiometry with measured RECD and REM verification provides the
best fitting accuracy, with S-REM verification being slightly less accurate. Insert
phone HL data with age-related average RECD is next best.
This software provides average RECDs for 1 - 60 months, 6 - 10 years of age and
Adult. A sampling of age-related foam-tip HA-2 RECD values is shown below.
Age/Freq
250
1 month
3
12 months
3
24 months
3
36 months
3
60 months
3
8 yrs - Adult
3
Values are from DSL 5.0 but differ from DSL in that values for 119 months have
been used for ages >119 months.
FastFacts 15.2: RECD facts
0611
for audiometry OR
(preferred) or use age-related average RECD.
for audiometry AND you
500
750
1000
8
9
12
6
8
10
5
7
9
5
7
9
5
7
9
4
6
8
DSL 5.0 RECDs differ from DSL 4.1 RECDs.
RM500SL User's Guide Version 2.8
if you verify using
use REM
and need not be measured.
1500
2000
3000
15
15
16
10
11
11
9
10
10
8
9
9
7
8
8
7
7
8
S-REM, you
for
4000
6000
20
23
15
17
14
15
13
14
13
13
13
13
Page 60

Advertisement

Table of Contents
loading

Table of Contents