Electrical Connection; Water Supply Connection - Zanussi ZWF2105W2 User Manual

You can adjust the level the machine by adjusting the feet
First, loosen the plastic adjustment nut.
Adjust by rotating the feet upwards or downwards.
After the level has been reached, tighten the plastic adjustment nut
again by rotating it upwards.
Never put cardboard, wooden blocks or similar materials under the
machine to balance the irregularities on the level of the ground.

ELECTRICAL CONNECTION

Your washing machine works with 220-240V and 50Hz.
The machine has a 13 amp plug attached, which must be connected
to a 13 amp Earthed socket.
Our company will not be responsible for any damages that may
occur as a result of usage without grounding.

WATER SUPPLY CONNECTION

Your machine has a single water (cold) inlet.
To prevent from the leakages on the connection joints, 1 seal is
included in the hose packing.(Fit this seal on the end of the water
inlet hose at the tap side.)
Connect the end with bracket of the water inlet hose to the water inlet
valve at the rear of the machine and the other end to your tap. In
situations where you are not assured, let a qualified plumber make
the connection works.
Water pressure of 0,1-1 MPa from your tap will enable your machine
to work more efficiently.(0,1 MPa pressure means water flow of more
than 8 liters in 1 minute from a fully opened tap)
After connections are completed, check for the non-leakage of the
connection joints by turning on your tap completely.
Be sure that water inlet hoses are not folded, broken or crushed.
Mount the water inlet hoses to a 3"/4, geared water tap.
4