Starting The Upgrade - ATEN Master View CS-1762 User Manual

CS-1762 / CS-1764 User Manual
4. Shut down the computers on your CS-1762 / CS-1764 installation.
5. Invoke Firmware Upgrade Mode (see p. 19).
The front panle LEDs flash together to indicate Firmware Upgrade Mode is in effect.

Starting the Upgrade

To upgrade your firmware:
1. Run the downloaded Firmware Upgrade Package file - either by double clicking the
file icon, or by opening a command line and entering the full path to it.
The Firmware Upgrade Utility Welcome screen appears:
Note: The screens shown in this section are for reference only. The wording and
layout of the actual screens put up by the Firmware Upgrade Utility may vary
slightly from these examples.
2. Read and Agree to the License Agreement (enable the I Agree radio button).
22
2004-06-04