Behringer EURORACK UB1832FX-PRO Technical Specifications page 3

3
EURORACK UB1832FX-PRO Technical Specifications
Frequency Response
Microphone input to main out
<10 Hz - 90 kHz
<10 Hz - 160 kHz
Stereo Inputs
Type
Impedance
Max. input level
EQ Mono Channels
Low
Mid
High
EQ Stereo Channels
Low
Low Mid
High Mid
High
Aux Sends
Type
Impedance
Max. output level
Stereo Aux Returns
Type
Impedance
Max. input level
Main Outputs
Type
Impedance
Max. output level
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those
listed or illustrated.
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE MUSIC GROUP (MUSIC-GROUP.COM). ALL TRADEMARKS ARE THE PROPERTY OF THEIR
RESPECTIVE OWNERS. MUSIC GROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND
SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS ONLY. FULLFILLERS AND RESELLERS ARE NOT AGENTS OF MUSIC GROUP AND HAVE ABSOLUTELY NO
AUTHORITY TO BIND MUSIC GROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR
MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSIC GROUP IP LTD. ALL RIGHTS RESERVED. © 2012 MUSIC GROUP IP LTD. TRIDENT CHAMBERS,
WICKHAMS CAY, P.O. BOX 146, ROAD TOWN, TORTOLA, BRITISH VIRGIN ISLANDS
+0 dB / -1 dB
+0 dB / -3 dB
1/4" TRS connector,
electronically balanced
approx. 20 kΩ
+22 dBu
80 Hz / ±15 dB
100 Hz - 8 kHz/ ±15 dB
12 kHz/ ±15 dB
80 Hz / ±15 dB
500 Hz / ±15 dB
3 kHz / ±15 dB
12 kHz / ±15 dB
1/4" TS connector, unbalanced
approx. 120 Ω
+22 dBu
1/4" TRS connector,
electronically balanced
approx. 20 kΩ bal. / 10 kΩ unbal.
+22 dBu
1/4" TS connector unbalanced
approx. 240 Ω balanced /
120 Ω unbalanced
+22 dBu
Control Room Outputs
Type
Impedance
Max. output level
Headphones Outputs
Type
Max. output level
DSP
Converter
Sampling rate
Main Mix System Data
2
Noise
Main mix @ -∞,
Channel fader @ -∞
Main mix @ -0 dB,
Channel fader @ -∞
Main mix @ 0 dB,
Channel fader @ 0 dB
Power Supply
Mains voltage
Power consumption
Fuse
Mains connection
Physical/Weight
Dimensions (H x W x D)
Weight (Net)
Measuring conditions:
1: 1 kHz rel. to 0 dBu; 20 Hz - 20 kHz; line input; main output; unity gain.
2: 20 Hz - 20kHz; measured at main output. Channels 1 - 4 unity gain; EQ flat; all channels on main mix;
channels 1/3 as far left as possible, channels 2/4 as far right as possible. Reference = +6 dBu.
1/4" TS connector unbalanced
approx. 120 Ω
+22 dBu
1/4" TRS connector, unbalanced
+19 dBu / 150 Ω (+25 dBm)
24-bit
24-bit Sigma-Delta,
64/128-times oversampling
40 kHz
-101 dB
-93 dB
-81 dB
100 to 240 V~, 50/60 Hz
43 W
100 - 240 V~: T 1.6 A H 250 V
Standard IEC receptacle
approx. 3.5 x 16.9 x 14"
approx. 90 x 430 x 355 mm
approx. 11.7 lbs / 5.3 kg